How to make a cap from a newspaper - 19 original ways + tips

Home House and cottage Do it yourself

A newspaper cap is a cute and practical headdress that protects from the sun's rays. The biggest advantage of such a hat is that it can be made in a few minutes anywhere. To do this, you don’t need scissors, glue, or threads—it’s enough to know how to properly roll an ordinary newspaper. It is believed that it is correct to wear a classic cap slightly tilted to one side. Often this does not work out, since it is not always possible to choose the correct size of this headdress. There are no such problems with a paper cap; its main purpose is protection from the sun. In addition, a paper cap can be made very original. It is believed that a classic cap is a small cap, flattened on the left and right. But now a cap can be called an ordinary sun hat from a newspaper. All you have to do is use your imagination and from a sheet of newspaper you will get a cap in the style of a cowboy hat or cap with a visor. After all, modern designers on high fashion catwalks have been experimenting with this model of cap for a long time, why don’t we try to make something special out of the classic version of a military headdress?

So, to make a cap we need a spread of a regular newspaper. Some models of caps use a ruler, pencil and paper clips, but this is not at all necessary. We will be putting together the following cap options:

Classic cap
Pioneer cap
Budenovka pilot's cap
Square cap
Cap with visor
Aviation pilot
Rain helmet
Ordinary cap
Medical cap
Chef cap
Nurse cap
Cap
African cap
Square cap
Cowboy hat
Cap-Chinese cap
Elegant cap
Simple cap
Santa cap

Classic newspaper cap

A classic version of a neat cap, worn slightly to the side.

To make a cap, it is better to take a square from a newspaper with a side equal to the volume of the head plus 1.5-2 cm.

Fold the newspaper in half.
We bend each of the resulting rectangles in half to the center.
Then we fold part of the paper from the edge of the newspaper to the resulting fold line again.
We bend the upper corners into a triangle into the center of the model. We lift up the bent part of the newspaper from the edge.
Turn it over to the other side and bend it left and right along the fold lines. The result was a square with folds.
The bottom edge needs to be folded over the folds, then straightened.
Decorate as you wish with stickers.

Simple option

Transfer the head circumference measurements onto thick cardboard, adding 1-2 cm to join the ends. They can be glued with hot glue or stapled with 2 paper clips. To prevent a child from being scratched by them, the metal ends should be on the outside of the part. Be sure to try it on to check that the ring is made correctly and only then finally connect the ends of the strip to each other.

The width of the band is 6 cm, but you need to add another 2 cm so that the upper edge can be cut into triangles. This is necessary for gluing the band to the circle of the crown. Its diameter should be 3-4 cm larger than the workpiece made, so that the edges of the circle look out along the entire perimeter beyond the boundaries of the band.

Pioneer cap

A cap of a slightly modified shape that can be worn not only on the side, but also in the middle of the head.

Fold the newspaper spread in half and fold it over to mark the center line.
We bend the corners of the center line towards the center of the model.
We bend one layer from the bottom up and up again.
Turn it over. We bend one side on the side about halfway, then the other too. We bend the bottom edge of the model along the bottom edge of the rim.
We unfold the cap and bend the small corners from below to the intended line.
We fold the paper up again, then up again.
We turn the model over. We first bend the large corner down and then hide it.

Hat with brim

It won't be that difficult to make a hat with a brim. Moreover, the detailed diagram will become clear to school-age children.

Let's describe the entire algorithm for creating a hat.

Take any newspaper and make a square piece out of it. Bend this sheet in half, and then in half again so that the bends are outlined;
Then unfold the paper so that you are left with a double rectangle. Tuck the hidden corners inward, but do not connect the folds along the edges;
Open the last folds from the inside and press a little along the entire workpiece. Turn the workpiece with the wrong side up, following the fold lines, bend the edges towards you, and then fold the “sides” here on all sides;
Straighten the hat, press it down a little and you can wear it for an evening walk.

Budenovka pilot's cap

A functional cap model that is very convenient for sun protection.

Fold the newspaper spread in half, then fold it in half on the other side to mark the center fold line.
We unfold and along this line we bend the corners on one side and the other.
We bend the rim from below, turn it over to the other side and also bend the rim.
We bend the corners at the bottom to the opposite side. This results in an isosceles triangle.
We unfold the model along the side fold line so that the cut shape takes the form of a square.
We bend the corners from the bottom towards the center of the model. The pilot is ready.

Tips for beginners

Often mothers want to know how to make a paper pirate hat for a child for a children's party.

The first scheme for making a pirate hat

The procedure will be as follows:

You need to choose a convenient material for the job. This can be a single spread of standard-sized newspaper or a large sheet of cardboard. You can use regular paper, but then you will need wire to create the frame of the hat.
The material should be cut strictly in half, otherwise the product will not have a very neat appearance.
The fold should separate the long side of the sheet. Often inexperienced craftsmen bend the newspaper along the short side; this is not correct.
The corners of the sheet that are on the side of the fold should be folded towards the center.
As a result, it becomes clear that the product has the appearance of two triangles, which are combined with certain sides. It is necessary to carefully iron the folds, otherwise the hat will have an untidy appearance.
If the bent corners begin to unbend, they can simply be secured with tape.
Then the lower edges of the headdress are turned up. After this, you can see that the workpiece begins to acquire the correct appearance. That is, it becomes like a pirate's headdress, except for the sides that stick out at the bottom. To correct this situation, you should bend one of them up. For better reliability, you can secure it with tape.
After this, the finished product is turned over to the other side, and the same is done with the second protruding edge.

The second scheme for making a pirate hat

The third scheme for making a pirate hat

To do this, draw a pirate emblem, cut it out and glue it to the front of the dress. You can also paint the product in the appropriate color. After you've learned how to easily make a pirate hat out of paper, your child may have something that no one else around them has. This workpiece does not require too many materials or special skills. You just have to show your imagination. The result will delight and surprise everyone, and, first of all, your baby.

The fourth scheme for making a pirate hat. What do you think about this? , your opinion is important to us

Square cap

An unusual version of the cap, which fits tightly to the head and has a visor.

Fold the newspaper in half and then into a quarter to locate the center line.
Open it up and make a triangular roof.
First fold the rectangular strips into 2 halves, then bend them.
Turn the model over and bend the edges from the sides towards the center of the model.
Let's fold regular triangles in both corners.
We bend the triangular roof and tuck it in.
Open the model and align it to form a square.
Rotating, bend the corners, open.
We turn 4 corners. The result is a hat in the shape of a box.

Welt

The welt for the craft can be made from a thin strip of black cardboard, attaching it to the front of the hat directly above the visor using two buttons. In sewing accessories stores you can easily find a pair of gold-colored metal buttons with embossed stars. They are usually sold with loops at the back and can be easily sewn to the cardboard base using regular thread.

If you want to make your cap more elegant, then buy a piece of yellow twisted cord, as in the photo above. Take one that is not too thick, as you will have to make loops along the edges of the welt to put on the buttons. To do this, you will need a matching nylon thread, which you need to tightly wrap the edges of the cord, bent in half, with many turns.

Cap with visor

Fold the newspaper in half, then fold the other side in half to mark the center fold line.
We unfold and along this line we bend the corners on one side and the other.
We bend the rim from below, then turn it over to the other side and crimp the corners of the rim.
On the left and right we fold the model to the center fold line.
We fold the strip of paper from the bottom to the middle, bending it in half.
Then we bend the corners of the rim towards the center of the model and tuck it into the middle.
We turn the model over. We fold the largest upper corner towards the center of the model and tuck it under the rim.
We unfold the model, pressing it a little in the center. The cap is almost ready, all that remains is to bend the corners at the top and hide them under the paper.

High cap

The first thing that comes to mind when looking at this model is a Halloween witch hat. Although a pointed cap would also be suitable for a wizard. The headdress folds up easily and quickly, in just a few steps.

Step by step description:

We bend the original square in half from bottom to top.
Fold the left side along the dotted line.
Then the right one.
We bend the protruding bottom flap.
On top of it is the second one.
We open the product from the inside and round it into a cone.

Ordinary cap

In order for the product to turn out neat, it is better to make fold lines along special pencil marks.

First, we outline the fold lines so that the work turns out neat. We fold the rectangular spread of the newspaper along a larger diagonal to mark the fold line, first on one side, then on the other. Then fold the newspaper in half to mark the center fold line.
Now let's get to work. Fold the newspaper diagonally to form an isosceles triangle.
Now we fold the corners up along the intended fold line so that we get a square.
Fold the corners in half again, then in half again to mark the fold line.
Then we fold the corner along the intended fold line so that the edge sticks out outside the model.
We do the same on the arc side. The result was a square with the edges of paper sticking out on both sides.
Now we take the opposite corner and fold one layer to the center of the square, leaving about another 1 cm of layer for the rim.
We turn up the rim.
Turn the model over to the other side. Fold it in half corner-to-corner.
We unfold the model and hide the bottom corner inside the cap.

Tips for working with paper

To make your creative work satisfying, you should heed a few tips:

you need to start creative work only in a good mood;
You should be responsible when choosing a place for creativity: nothing should interfere, there should be enough space and light;
When working with paper, you need to keep your hands clean so as not to leave marks on the product. If you have to deal with glue or paints, it is better to immediately prepare wet and dry wipes;
you need to remember that scissors are a sharp tool, you should not leave children with them unattended;
Before folding life-size origami, you should practice on a “draft” - an unnecessary sheet of paper;
For a homemade hat to look good, all lines and folds must be neat and symmetrical.

Following these guidelines will help you have fun and enjoy paper crafting.

DIY Harry Potter hat

DIY turnip costume for girls and boys

Medical cap

A round-shaped hat that can be used as an element of a fancy dress costume.

We cut the newspaper spread into two parts so that we get two identical rectangles. Let's put them together.
Fold the larger side of the folded together rectangles about 1.5 cm along the edge of the newspaper.
We do the same on the opposite side. The length of the fold should be approximately equal to the length of the paperclip.
Now we pull one sheet out of the other, but not all the way. And at the end we fasten them together with paper clips on both sides.
We roll the model in a circle and insert one sheet into the other from the opposite edge. Secure with paper clips.

Stewardess headdress

A distinctive feature of this accessory is its deep fit. In addition, such products are made in blue or light blue. When making a flight attendant's hat from paper, you will need a rectangular piece of paper. Its width should be slightly larger than the length of the future cap. This is due to the fact that the side parts will bend by a quarter.

The following master class will help you do this:

The rectangular sheet is folded into two equal parts, but always in length.
The upper edges bend toward the middle by about a third.
The bottom edge is initially bent in half, and then folded up so that the corners of the resulting model protrude slightly to the sides.
The future cap is turned over, and both sides are turned up approximately a quarter.
After this, the element located below is bent twice by approximately a third.
The top of a classic hat is folded inward.

At this stage, the flight attendant's paper accessory is ready. Additionally, it is recommended to paint it in a suitable color.

Cap - nurse's hat

A cap model for people with imagination. Can be used as an element of a fancy dress costume.

Fold the newspaper in half, then straighten it and fold it in half again on the opposite side to mark the fold lines.
We bend about 1.5 cm along the edge on one side and bend it.
Fold the model in half to mark the fold line.
Then we fold the model from the smaller side towards the center to the inflection line. We do the same on the opposite side.
When folded, it becomes a rectangle. Now we fold one of the corners so that its vertex is outside the model.
We do the same on the other side.
Fold the vacated rectangle towards the center. We unfold the model.

Which hat is better - store-bought or homemade?

Do-it-yourself dressing room: drawings, diagrams, projects and modern ideas for arranging a dressing room (115 photos and videos)

Of course, it’s easier to buy a highlighting cap in a store.
But not everyone can afford it and not every locality can find it. So, for example, a similar device is unlikely to be found in a village store. But everyone certainly has packages. If we talk about durability, then a rubber cap is in no way inferior to store-bought ones. The polyethylene one is not as strong, but it will definitely be enough for one time.

The most difficult thing is to carefully make the holes so that they do not tear or are too large. In addition, all holes should be the same size, unless the goal is to make different strands.

When painting a house, you need to be as careful as possible, especially with a cap from a bag. Any wrong movement can tear the material or create a gap between the holes, which can cause an awkward stain to appear on your hair.

It is also important to ensure that dyed strands do not come into contact with undyed ones. Otherwise, the “drawing” will go wrong, and the result will not be what you expected

Rubber caps are suitable for reusable use. The main thing is to check the hat before each dyeing to ensure that it is intact and in good condition. If something about your hat bothers you, it’s better to replace it, because no one wants to risk their appearance. A hat made from a plastic bag should definitely not be reused. Most likely, it will already lose its shape, and it will be difficult to secure it as tightly to your head. In addition, the cost of the package is so low that it is better to buy a new one than to suffer with the old one.

A highlighting cap is a simple and affordable way to create a fashionable hairstyle. It's much more convenient than painting with foil, and cheaper than going to a salon. The main thing is to show patience and accuracy, and then in an hour you can turn a boring hairstyle into a fashionable coloring yourself and without the help of specialists.

Cap-shaped cap

A cap with a visor that covers your head well.

We fold the corners of the newspaper, smoothing the folds well so that the cap holds tighter.
We wrap the strip from the bottom twice towards the center. The result is a headband.
Take the sharp edge at the top and place the corner under the rim.
Turn the model over and fold the newspaper on the sides to the center fold.
Fold the strip from the bottom in half towards the center. Then we fold the corners towards the center and hide them under the rim.
We unfold the cap and tuck the corners at the top under the rim.

Small elegant top hat for girls

The following instructions from megamaster.info will tell you how to make a paper hat that will decorate any holiday outfit. It is attached to the hairstyle using hairpins or a hoop. This accessory can be used not only by children, but also by adult girls. Such mini cylinders can be a good solution for photo shoots.

Prepare before work:

thick cardboard;
PVA;
glue stick and gun;
ruler;
corrugated paper;
paper for working using the quilling method;
braid;
scissors.

Before manufacturing, as in the previous version of the cylinder, we need to decide on the dimensions. There is no need to measure the circumference of the child’s head; the work can be done “by eye”. For those who are engaged in such creativity for the first time, we recommend using standard sizes; we will indicate them during the work.

And now the instructions on how to make a miniature paper hat:

Small elegant cylinder (Step 1)

Take a ruler and pencil. Draw a strip on the cardboard with a width of nine centimeters and a length of forty-two centimeters.
On the resulting strip we draw small stripes on the bottom and top. From the edge, each line drawn should be from one to two centimeters. Using the resulting strips, we cut out the cloves. They will help us glue all the resulting components together.
We fold the strip and secure it. Use glue. We recommend using a stapler, this way the work will be stronger. We cut off the resulting excess part during the folding process. (Step 2)
Make two circles. It is very important that they are level and match the required size. The first diameter should be twenty centimeters. It will be used as the brim of the hat. The size of the second circle should be twelve centimeters - this is the top of the product.
We take a cylinder that has already had its teeth and the largest circle cut out. We glue the blanks. Start from either side. After this you can glue the bottom of the hat.

Externally, the cylinder may seem ready. It needs to be decorated. We use corrugated paper and quilling techniques. After practice, you can indulge in fantasy.

So:

(Step 3)

We cut out a circle from paper, it should be smaller than the base, and apply it to the cap. We wrap the excess part inside and secure it with core glue. We decorate the top of the mini cylinder with braid;
We make flowers. Use paper that matches the color of the hat. Use a special stick to twist the strips. Form flowers. Use the same principle to make the leaves. Glue the resulting products to the cylinder.
To prevent the finished accessory from falling off your head, attach it to a hoop, you can use an elastic band or braid.

This is just an example of work, you can make the product any way you want, with larger or smaller margins and decorated as you wish

Square cap made from newspaper

A cap that completely covers your head from the sun.

Bend the corner of the newspaper to the opposite side.
Bend the strip of paper upward at a folded angle.
We straighten the newspaper.
We bend the opposite corner in the same way.
Straighten and turn over the newspaper. We bend the rectangular strip on the opposite side.
We place the opposite edge on the folded strip so that we get an “envelope”.
We unfold the newspaper. The fold lines that intersect in the center should be clearly visible.
Using your finger, bend the center of the intersection of the fold lines upward and fold the sides of the newspaper together in pairs. You will get an isosceles triangle with a free rectangular strip of paper at the bottom.
Fold the triangle in half so that equal angles overlap each other. When we unfold the triangle, we can see the center of its base.
We turn equal angles on both sides towards the center of the base slightly with a grip.
We turn the model over. We fold the strip of paper at the bottom of the model by about 1 cm.
We bend the sides on the left and right to the center of the model, while the corners from below need to be tucked into one another.
Bend the top corner of the model to the center.
Then you need to take a layer of paper at the top angle and unfold the model. The result was a cap with a visor.

Cap with regular crown

The next option for making a military cap, the photo of which is above in the article, is a little more complicated, since the crown for it is not represented by a simple circle, but consists of two parts. In the picture below you can see the pattern of such a fodder hat. The red stripe is the band. For this version of the headdress, it is not cut wide. It is enough to draw a pattern 3-4 cm wide. You already know how to measure the required length.

The visor is ordinary, occupies 1/3 of its entire circumference. The crown is a ring made of paper, the front part of which has a slight extension. The top of the crown is round. All parts are attached either with tape to each other, or an additional strip is cut out at the joints, which is first cut into triangles or trapezoids, then spread with PVA glue and the required element of the craft is attached.

To make the cap look voluminous rather than flat, insert cotton wool twisted into a “sausage” into the gap between the ring and the circle of the crown in front of the child’s head. If you are worried that it will fall out, you can first coat the paper with PVA glue. This simple design will lift the crown up and the cockade will be more clearly visible.

Cap - cowboy hat

An original headdress that has a concave brim and looks like a cowboy hat. We will need two complex square sheets of 50 by 50 cm. The larger the squares, the larger the finished product will be.

Fold the newspaper in half. Then fold it in half again on the other side.
Unfold the newspaper and use a ruler to mark 4 cm to the left and right of the center fold line.
We bend the corners so that 4 cm to the left and right of the fold line from the fold line remain free.
Next, you need to move your hand inside the folded corner of the newspaper and bend it along the bisector.
Let's do the same on the opposite side.
Turn the model over and bend the corners along the fold line.
We turn the model over. Fold the bottom corners of one layer of newspaper toward the center.
We turn the model over again and bend the corners from the bottom to the center on this side.
Now we fold the side strip to the center by about 2 cm and bend it again.
We turn the model over and do the same on the opposite side.
Let's open the model. The result was a cap.
We bend the corners on both sides and straighten them.

It is important to press very hard when folding the paper so that the model holds its shape well.

What kind of hats can be made from paper?

There are many instructions for making hats. Whether it’s a cap, a skullcap, a cowboy hat or a samurai helmet – following the diagrams, it won’t be difficult to put them together.

What you need to make a paper hat

To make a paper hat, first of all, you need to prepare a place to work, materials and tools.
It will be most convenient to sit at a table with good lighting. There should be enough space so that you can lay out a sheet of paper and a little more.

For some models of hats, all you need to work with is the material itself - paper. For others, you will need to additionally prepare the following:

scissors;
glue;
paints and decorations;
ruler, pencil;
a compass or anything round that can be traced, the right size.

You should immediately clarify what you will need for the work so as not to interrupt the creative process.

What paper can you use to make a hat?

Paper hats are good to make because you can use almost any large enough piece of paper you have on hand as the base material, for example:

full spread of the newspaper;
A4 sheet of cardboard;
a piece of paper wallpaper;
office or landscape paper;
colored paper or cardboard.

Important! Do not use paper that is too thin or soft - it will not hold its shape.

Cap - Chinese cap

We make a square sheet of newspaper. Fold the sheet in half and unfold it.

Then fold it in half on the opposite side.
Bend the edge of the paper about 2 cm.
We turn the model over and bend it on both sides to the center bend line.
Then we bend the corners from the top layer of paper diagonally across the rectangles so that they look beyond the edges of the model.
Bend a strip of paper from the bottom towards the center.
We straighten the cap and press down the upper part.

Components of an officer's cap

To understand how to make a military cap with your own hands from paper, you need to carefully examine the officer’s headdress. The photo below shows the cap of a Soviet officer. This is a traditional forage hat, which consists of the following parts:

crown - upper part;
band - an element that fits the head;
visor;
cockade - emblem of the military branch;
The welt is a thin strip that is the chin strap. In the sample below it is black, but often the welt is made of twisted filigree cord of golden color.

To make a military cap for a child, it is enough to cut out the visor, band and crown from thick cardboard. The emblem can be drawn with markers or a traditional red or gold star can be glued on.

Elegant cap

Fold a rectangular newspaper sheet in half lengthwise to mark the center fold line of the larger side.
Then unfold and fold in half widthwise.
We fold the corners on both sides towards the center and iron them with our hands.
We bend the rectangular strip from below towards the center of the model 2 times.
We turn the model over and do the same on the reverse side.
Turn the model over and bend the corners to the center bend line.
We straighten the corners and bend them in the other direction - up along the resulting fold lines.
When folded, bend them towards the center of the model and tuck the edges under the rim.

Selecting a model and size

Before starting work, you should decide on the size of the paper sheet. For children, it is preferable to make a cap from the traditional A4 format. For teenagers, as well as for adults, it is more appropriate to use a newspaper spread. It is softer and will be the best option for a homemade cap. In addition, this material is the most affordable. The following types of caps can be made from paper:

traditional;
pioneer;
medical;
budenovka;
toque;
with a visor.

If you use a rectangular paper sheet, you will get a pointed cap. To make a model with a flat top, it is recommended to prepare a square-shaped canvas.

Budenovka

Medical

Pionerskaya

Povarskaya

With visor

Simple cap

The easiest way to make a cap from a newspaper in a hurry.

We make a square from a newspaper sheet and fold it in half.
We bend the corners of the model, grabbing approximately 1/3 of the length of the side on both sides. 1/3 of the side of the square in the middle remains free.
Bend a strip of paper at the bottom of the sheet towards the center by about 2 cm.
Turn the model over and bend the corners to the center by about 3 cm.
Then we bend a strip of paper from the bottom of the model towards the center along with the folded corners.

LiveInternetLiveInternet

Santa cap

A variant of a paper hat for a New Year's masquerade. This hat can be rolled up from newspaper very quickly and will bring real fun to the children.

Mark the inflection lines. We fold a square sheet of newspaper diagonally.
Using a ruler and pencil, mark 1/3 of the side of the square. You can roll the paper into a tube and smooth it a little. When we unfold it, two stripes will be visible - the 1/3 marks.
From the side of the mark, bend the corner of the square diagonally to the mark. We bend the opposite corner towards the center. Fold both corners into an envelope.
Unfold the paper. An isosceles triangle is visible at the top, indicated by inflection lines. You need to attach each side of the triangle to the base.
We fold the opposite corner with the top to the base and fold the strip twice from the bottom.
We fold the opposite corner to the base of the triangle and smooth it.
From the point where the folds intersect, bend the model so that one of the edges protrudes approximately 1.5 cm from the edge.
We bend the opposite side in the same way.
We bend the paper protruding beyond the edges of the model back and straighten it.

Thus, from a simple newspaper that is always at hand, you can make a huge number of interesting caps that will protect you in sunny weather.

What you will need

Before starting production, you should select the necessary tools. The advantage of a paper cap is the minimum time required. This process does not require scissors, glue, or thread. All you need is regular newsprint. To create some models you will additionally need:

paper clips;
pencil;
ruler;
paints;
brushes

Before you make a cap, you need to study what, besides newspapers, you can make it from.

Made from cardboard - the product will be denser.
Made from colored paper - this option will be interesting for young children.
From album sheet - usually a children's headdress is made from this material, due to its size.

To make a paper cap with your own hands, you do not need special materials. If you want to paint it, it is recommended to prepare gouache and a wide brush in advance.

Landscape sheet

Newspaper

Colored paper

Tips and good examples of hats

DIY chair cover: how to sew soft covers for chairs and armchairs (130 photos and videos)

Before you start creating your own header for YouTube, I’ll give you some practical tips:

Now let’s look at examples of what successful and effective headers exist for large million-dollar bloggers and channels. For example, the case when the profile and topic of the blog are written in black and white in the header. In this case, the viewer who comes to the channel from the very first seconds understands whether the content is interesting, relevant for him or not.

An example of a hat for a multimillion-dollar psychologist blogger:

Also, if you “work as a face” and through a personal brand, then it is important to post your personal photo and sign your accounts on social networks. Here's a great example of personal branding:

Here's a great example of personal branding:

It’s great when the profile header not only states the topic of the blog, but also does not load or strain you, but, on the contrary, creates a positive perception with the help of light tones and bright colors.

Here is an excellent example of a channel for photographers and videographers, when a seemingly complex, narrow-profile topic can be presented with the help of a competent visual artist as easy and relaxed:

Well, and finally, you can not write anything, but be remembered by your subscribers with the help of acidic creativity, provocative color solutions and signs.

An example of a “screaming” design by one of the popular activists and public figures that will definitely stick in your memory.

What can it be made from?

Various things are suitable for creating a hat. It all depends on the woman’s imagination and what is in the house. Here are some examples of what this device can be made from and how to make holes in it.

Tight package

It is better to take polyethylene, since cellophane breaks very easily. It should be large in size so that it can be easily wrapped around your head and secured like a cap. The soft material can be tied in a knot at the back near the neck or under the chin. A denser version is fixed with tape.

Important. The cap should fit tightly, cover all the hair, but not cover the eyes.

Pool hat

Due to the fact that it is made of rubber, the hat fits tightly to the head. The holes need to be made in advance, because otherwise it will not be convenient.

It is worth noting that you need a cap for the pool, and not for the shower, since the second one is not made of rubber and therefore does not fit as tightly to the head as necessary.

Required Tools

Once you have decided on the material for the cap (rubber or polyethylene), you need to find other necessary tools.

Marker or felt-tip pen. Needed to mark on the cap exactly where the holes will be. It is better to take dark colors, as they are easier to see.
A sharp instrument. These could be nail scissors, an awl, tweezers, etc. It is needed to make holes in the hat.

Thus, the materials for creating a cap intended for self-highlighting are easy to find in any home.

Newspaper cap - step-by-step instructions for making original caps with examples